The usage of weaving machines varies depending on the type and purpose. The following are several different methods of using looms:

Foot pedal waist machine. This type of loom does not have a frame, and one end of the fabric roll is tied to the waist, with both feet pressing on the other end of the warp and tensioning the fabric. Use a warp divider to divide the warp yarn into even and odd layers, lift the warp yarn with a lifting rod to form a shed, then use a bone needle to guide the weft, and use a beating knife to beat the weft. This type of loom is the ancestor of modern weaving machines.
Modern weaving machines. Place the weaving machine on a stable ground, connect the power supply, and ensure that the motor runs normally. Fix the fabric to be woven on the weaving frame, adjust the position of the collision plate and weaving roller of the weaving machine, then start the motor and gradually feed it into the weaving machine. Pay attention to controlling the weaving speed and fabric tension. After weaving, press the stop button to remove the fabric from the weaving.
Handmade weaving machine. Prepare yarn and weaving materials, adjust machine tension, density, and speed parameters. Introduce the yarn into the weaving machine and start weaving. During the weaving process, it is necessary to check whether each part is running properly. After completion, conduct quality inspection and maintenance of the weaving machine.
Regardless of the type of loom, ensure that the machine components are intact and undamaged before use, understand the technical parameters of the machine, and follow the correct operating procedures. At the same time, pay attention to safety and avoid accidental injuries during operation.